Oil & Gas Operators and Drilling Contractors
Frame 13
Frame 13

Reduce drilling NPT by more than

30%

Oil & Gas Operators often think component failure and unplanned maintenance come from increased speed, temperature and pressure. Our data proves that it also comes from wear contamination. That’s why our CleanMud Magnetic Filtration System is proven to reduce non-productive time by at least 30%.

Why it works

Wear contamination is the primary reason your components fail.

Casing and drill pipe erosion, natural iron compounds and silica create tiny metal wear particles, less than 10 microns (μm) in size. This contamination is the primary cause of component failure and cannot be captured by traditional filtration methods. CleanMud captures wear particles under 1μm, which accounts for 35% of contamination.

Your components are not protected from wear contamination.

Components in the fluid ends of pumps and drill string don't often have anything to protect them from contaminated drilling fluids. CleanMud magnetic filtration can be easily installed, so that Oil & Gas Operators, Drilling Contractors and Fluid Suppliers can see near-instant returns on their investment.

Component failure is the primary cause of NPT (non-productive time)

Drilling at increased speeds, temperatures and pressures cause more wear contamination. As the volume of wear contamination increases, so does the speed of the component failure. The good news is that we've proven that using CleanMud Magnetic Filtration will increase the lifetime of your components by 52%.

CleanMud
Magnetic Filtration Systems

CleanMud systems come in two types:

Fully-automatic

This means that you don’t need to clean the magnetic filter elements manually. Our system automates it for you. 

Semi-automatic

Our semi-automatic system requires a technician to isolate the housing, operate he cleaning cycle and return the unit to service. 

Photo shown: Filter elements loaded with 100lbs of contamination in less than 6 hours